RIITOP 4 in 1 PCI-E Riser Card Adapter Board + 6 PIN 16x to 1x Powered Riser Adapter Card GPU Riser - Ethereum Mining ETH - w/ USB 3.0 Cable
DO NOT fill four slots at one time,you need to test your motherboard,this 4 in 1 adapter has higher performance requirement for motherboard.
Please follow this correct operation:
Add ONE 16x riser card at ONE time and it will work. Add one card, boot to Windows, shutdown, add second 16x riser card, boot to Windows, shutdown, etc etc, till the motherboard's limit. Thanks!
RIITOP 4 in 1 PCI-E Riser Card Adapter Board + 6 PIN 16x to 1x Powered Riser Adapter Card GPU Riser Adapter - Ethereum Mining ETH - w/ 60cm USB 3.0 Extension Cable & 6-Pin PCI-E to SATA Power Cable.
To every "miners"
About the 4 in 1 Adapter,at first please DO NOT fill four slots at one time,you need test your motherboard,this 4 in 1 adapter has higher performance requirement for motherboard,Our test is no problem (Asus z270 motherboard and NVidia 1070) ,It's like a pipe,if the water flow is adequate,then it could install 10 Faucet,But if the water pipe itself is very narrow,there is useless to install 10 faucet,in this case, the motherboard just like pipe.
Solve the quantity of port of PCI-E , 1 port extended to 4.
The main control board is powered directly by PCI-E interface,NO extra power line needed,No extra driver needed,plug and use.
Used plug-in design, without through the extension line could directly access the motherboard interface, and can be fixed to the Computer case.
Reduce the number of adapter card and adapter line, one line directly to the port, effectively reduce the loss of interface interference and wire.
Operating System Compatibility: Windows 10/8/8.1/7/Vista/XP 32/64-bit, Server 2003-2008 32/64-bit, Linux ect.
1x 4 in 1 PCI-e Riser Adapter Card.
4x PCI-E 16X riser board.
4x 60cm USB 3.0 cable.
4x 6-pin PCI-E power to 15-pin SATA power cable.